The target material has a wide market, a variety of useful uses, and a promising future. Let's quickly go over the primary performance requirements of the target material for you so that you can better grasp the performance of the material. I sincerely hope it will be useful to you.
Purity: Because the purity of the target has a significant impact on the performance of the film, purity is one of the primary performance measures of the target.The target material's purity criteria differ in practical applications, though.For instance, the size of silicon wafers has increased from 6′′, 8′′ to 12′′ due to the microelectronics industry's rapid expansion, and wiring width has gone from 0.5um to 0.25um, 0.18um, or even 0.13um, previously 99.Target purity of 995% can satisfy the requirements of the 0.35umIC procedure, whereas 99 is needed to prepare the 0.18um line.99.9999% or even 999%.
Impurity content: The main sources of pollution for the deposited film are impurities in the target solid and oxygen and water vapor in the pores.varied targets for various reasons require varied impurity contents.For instance, the semiconductor sector has specific standards for the concentration of radioactive elements and alkali metals in targets made of pure aluminum and aluminum alloys.
Density: The target material is typically required to have a higher density in order to decrease the pores in the solid and increase the functionality of the sputtered film.The electrical and optical characteristics of the film are also impacted by the density of the target material, in addition to the sputtering rate.The performance of the film increases with target density.The target material's ability to survive the heat stress during the sputtering process is also improved by increasing its density and strength.One of the target's major performance measures is density.






