Tantalum tungsten alloy production process, tantalum tungsten alloy
Tantalum tungsten alloy (TaW alloy), currently commonly used grades are tantalum 10 tungsten (Ta10W), tantalum 2.5 tungsten (Ta2.5W), tantalum tungsten alloy is a high-density material with high melting point, high tensile strength, good dynamic ductility and corrosion resistance. It has far-reaching application prospects in chemical corrosion protection, machinery, aerospace and military fields
Tantalum tungsten alloy production process
1 Mixed powder
Weigh the ultrafine tantalum powder and tungsten powder in the required proportion and mix them. Place the mixed powder in a drum mixer and mix them evenly to obtain a mixed powder;
2 Pressing mold molding
Put the fine powder into the mold and press it into shape:;
3 Sintering
Put the alloy rod into a vacuum sintering furnace, vacuum heat and sinter to obtain a rough ingot;
4 Melting
The rough ingot is melted repeatedly in a vacuum electron beam furnace or a vacuum arc furnace to make an alloy ingot
5 Improvement of finished ingot performance
Put the alloy ingot into a high-frequency furnace, heat it and forge it several times, and process the surface oxide skin to obtain a finished ingot
According to the size and weight of the profile, cut the material, forge and open the blank,
After multiple rolling or forging, after multiple vacuum annealing, a rod or plate is obtained, and then it is machined and polished to obtain a tantalum-tungsten alloy finished plate with good performance.







