
High Purity Tantalum Sheet
2.CAS number:7440-25-7
3.Atomic mass:180.95 [g/mol]
4.Melting point:2996 °C
5.Boiling point:5458 °C
6.Density at 20 °C:16.65 [g/cm3]
7.Crystal structure:Body-centered cubic
8.Coefficient of linear thermal expansion at 20 °C:6.4 × 10-6 [m/(mK)]
9.Thermal conductivity at 20 °C:57.5 [W/(mK)]
10.Specific heat at 20 °C:0.14 [J/(gK)]
11.Electrical conductivity at 20 °C:8.0 × 106 [S/m]
12.Specific electrical resistance at 20 °C:0.125 [(Ωmm2)/m]
Product Introduction
Tantalum is an ideal material for applications requiring superior corrosion resistance. Though not a noble metal, it possesses chemical resistance comparable to noble metals. With a body-centered cubic crystal structure, tantalum can be easily machined even well below room temperature, making it suitable for a wide range of chemical processes. We produce heat exchangers for chemical equipment, riveted racks for furnace industry, medical implants, and capacitor components for electronics with this reliable material. Yusheng Metal supplies high-purity tantalum sheets in various thicknesses and dimensions, and custom compositions are available for research and advanced projects.
Specification Table
| Item | Details |
|---|---|
| Grade | Ta, TaNb3, TaNb20 |
| Supply Status | Y (Hard), M (Soft) |
| Product Type | Tantalum Foil, Tantalum Sheet |
| Ta Foil | Thickness: 0.005–0.09 mm; Width: 30–120 mm; Length: >200 mm |
| TaNb3 Sheet | Thickness: 0.5–2.0 mm; Width: 50–200 mm; Length: 50–700 mm |
| TaNb20 Sheet | Thickness: 2.0–6.0 mm; Width: 50–200 mm; Length: 50–300 mm |
| Manufacturing Process | Mainly cold working, vacuum annealing, multi-roll mill finishing |
Product Advantages
✅ Excellent corrosion resistance, close to noble metals, suitable for harsh chemical environments
✅ Great low-temperature workability, good plasticity for bending and stamping
✅ Cold rolling at near room temperature to avoid surface oxidation
✅ Vacuum annealing, no phase transformation, stable and uniform material performance
✅ Compatible with PVD, CVD, ALD, E-Beam evaporation and thermal evaporation processes
✅ Suitable for fuel cells, solar energy and academic & industrial thin film research
✅ Custom compositions and sizes available; tantalum rod, tantalum powder and other forms are also available
Production Process
High purity tantalum sheets are mainly manufactured by cold processing. Tantalum ingots (15–30 cm) are cold forged into slabs of 8–10 mm thickness, then cold rolled with a reduction rate over 95%. In mass production, 2–4 rolling mills reduce slabs into plates 0.63–1.2 cm thick with common width 51–102 cm. Rolling is performed at or near room temperature to prevent oxidation. Thick tantalum plates are annealed under vacuum. Since no phase change occurs, heating and cooling rates are not critical. Further rolling is carried out on 4-high or multi-roll mills. Tantalum is relatively soft, so careful handling is required during processing and transportation to prevent scratches.
Applications
Chemical heat exchangers, furnace support racks, medical implants, capacitor components; thin film deposition (PVD / CVD / ALD / E-Beam evaporation), fuel cells, solar energy, industrial and academic research.
Why Choose Yusheng Metal
We specialize in tantalum cold rolling. We strictly control rolling and vacuum annealing to minimize scratches and oxidation. Standard tantalum foil and sheet are in stock, and custom compositions & dimensions for research projects are welcome. Our tantalum materials are widely used for evaporation and thin-film deposition. Tantalum rods, plates and powders can be supplied together. Each batch comes with material certificates. Shockproof vacuum packaging is adopted for export, fast sample delivery to support your R&D.
FAQ
Q1: What is the difference between tantalum foil and tantalum sheet?
A: Generally, thickness ≤0.09 mm is defined as tantalum foil; thicker material is tantalum sheet/plate. We can produce according to your drawing tolerance.
Q2: Why is tantalum mostly cold rolled instead of hot rolled?
A: Hot rolling causes severe oxidation. Cold rolling at near room temperature maintains better surface quality, and vacuum annealing is applied afterwards to release stress.
Q3: Can you supply tantalum sheets for ALD and electron beam evaporation?
A: Yes. We provide tantalum materials for evaporation and deposition, suitable for fuel cells, solar thin films and laboratory research.
Q4: What is the difference between Ta, TaNb3 and TaNb20?
A: They are tantalum-niobium alloys. Workability, cost and corrosion resistance change with niobium content. Tell us your working condition and we will recommend the proper grade.
Q5: What other tantalum products can you supply besides sheets?
A: Tantalum rods, plates and powder are available. Custom machined parts and special alloy formulations are also acceptable.
If you need any assistance, please contact us. Email: zy@tantalumysjs.com
Hot Tags: high purity tantalum sheet, suppliers, manufacturers, factory, customized, buy, price, quotation, quality, for sale, in stock, Tantalum Plate, Chemical Equipment Tantalum Plate, Corrosion resistant Tantalum Plate, Tantalum Bolt, Polished Tantalum Plate, Tantalum Hex Bolt
Previous
Tantalum BlockYou Might Also Like
Send Inquiry











