Metal corrosion is due to the degradation of metal materials caused by the environment. The direct consequence of metal corrosion is the shortening of the service life of engineering materials, and metal corrosion can lead to the degradation of material properties; metal corrosion threatens environmental safety, and the leakage of metal corrosion products or chemicals triggered by corrosion can seriously pollute water resources, the atmosphere and the soil environment, and can even lead to catastrophic accidents. In the pharmaceutical industry, red rust (Figure 1), the most significant direct product of metal corrosion, can lead directly to damage to components, such as leaking pipes, red foreign bodies adhering to diaphragms, and blockages on filter elements due to adsorption of red rust.

Oxidation is one of the most fundamental chemical reactions in nature, and the rusting of stainless steel is by its very nature an oxidation reaction. In nature, oxidation reactions occur in almost all metals, with the exception of a very few precious metals. As long as metal parts have reducing metal monomers that are susceptible to oxidation and are exposed to an oxidising environment containing oxygen, rust is bound to be present after a period of time.
1. Grading of red rust
Red rust is actually a mixture of different iron oxides, stainless steel equipment or systems present in high temperature fluid process systems, the surface of the free iron will first react with the hydroxide ions in the water, the whole reaction process is more complex, and may eventually generate a mixture of ferrous oxide, ferric oxide, ferrous hydroxide and ferric tetroxide, the specific composition of the specific gravity of the different will determine the colour of red rust The specific component specific gravity will determine the colour of the red rust.
Grade 1 - Easy to wipe off, the small particles deposited are easily removed from the surface and do not significantly alter the composition and roughness of the stainless steel surface. The deposited layer usually appears light yellow, orange or orange-red.
Grade 2- partially erasable - is generated by direct oxidation on surfaces that are unpassivated or where the passivation layer is not uniform and dense. At this point the surface roughness of stainless steel may occur significantly increased. The colour shows a variety of orange, red, brown, blue-violet, grey-black etc.
Grade 3- An almost indelible black oxidation product. The colour will gradually take on a golden, blue colour up to a thick black colour. The surface oxide layer is relatively stable and the migration of particles is reduced, but there is still a risk of migration and contamination (pure vapour systems!)
2. Measures to face red rust
The red rust phenomenon that occurs in pharmaceutical water systems is produced by the accumulation of small particles of iron-rich material on the inner walls of the system and is a product of oxidative corrosion of stainless steel. Traditional austenitic stainless steels are not resistant to stress corrosion, chloride attack and especially sulphide cracking, limiting their application in many environments. To solve this problem, there is an urgent need to find materials that are resistant to corrosion.
Tantalum is mainly found in tantalite and is symbiotic with niobium. Tantalum is moderately hard, ductile and can be drawn into thin foils in the form of filaments. Its coefficient of thermal expansion is very low. Tantalum has excellent chemical properties and is extremely resistant to corrosion, not reacting with hydrochloric acid, concentrated nitric acid or aqua regia, both in cold and hot conditions. It can be used to make evaporating vessels, etc. It can also be used as electrodes for electronic tubes, rectifiers and electrolytic capacitors. It is also used in medicine to make thin sheets or threads to mend damaged tissue. Although tantalum is highly resistant to corrosion, its resistance to corrosion is due to the production of a stable protective film of tantalum pentoxide (Ta2O5) on its surface. It is widely used as a heat-resistant material in aircraft, rockets and other industrial applications where high-strength components are required. In addition, tantalum metal has good physical and mechanical properties and good biocompatibility, making it another new biomaterial after titanium, and is widely used in medical-related fields such as oral implant placement, femoral head necrosis treatment, coronary artery stent placement, artificial acetabular prosthesis placement and surgical suture production.

Tantalum is an industry recognised material that is resistant to corrosion, abrasion and high temperatures and can be used in a variety of corrosive environments. Tantalum can therefore be used to prevent the corrosion of workpieces over time.

As tantalum metal is scarce and expensive in the earth, it is mostly used in highly sophisticated industries such as aerospace, electronic instruments and biomedicine, and it is unrealistic to use pure tantalum metal as a raw material for industrial equipment.
The surface alloy prepared by the tantalum vapour deposition technology developed by Yusheng Metals has the physical properties of tantalum metal, which can effectively improve the mechanical properties of the substrate, with excellent deformation and bending capabilities and unparalleled resistance to corrosion, high temperature and high pressure, making it the best choice for harsh working conditions. Yusheng Metals has used this technology to successfully coat tantalum for a wide range of industrial products in a variety of industries, providing our customers with high performance and low cost quality services.
In order to reduce the risk of red rust in pharmaceutical fluid systems, companies need to adopt the management concept "quality by design" and control the design from the source. In addition to optimising the production process, the choice of materials for the equipment is of particular importance.
The emergence of tantalum surface alloy technology has provided an advanced idea for solving the red rust phenomenon in the pharmaceutical industry. The tantalum plating of ordinary stainless steel workpieces gives the workpieces the corrosion resistance of pure tantalum products, using the superb corrosion resistance of tantalum metal to protect industrial equipment, reduce the production of red rust, purify industrial systems, save costs and benefit companies.





