Tantalum grounding rings for electromagnetic flowmeters. The grounding ring is in direct contact with the medium through the grounding electrode and then grounded with the instrument flange through the grounding ring to achieve equipotentiality with the ground to eliminate interference.
The tantalum grounding ring produced by Baoji Yusheng Metal Technology Co., Ltd. has sufficient stock in stock, and it should be noted that our company can customize the tantalum grounding ring according to customer requirements to meet the different usage scenarios of different customers.
As with electromagnetic flowmeters, there are many things to pay attention to. Among them, when measuring the liquid flow of non-metallic pipes, it is necessary to install a grounding ring, so as to protect the end face of the measuring pipe and ground it.
Requirements for using a tantalum grounding ring for an electromagnetic flowmeter: 1. The purpose is to prevent electromagnetic interference; 2. The grounding ring ensures that the electromagnetic flowmeter and the medium are at the same potential; 3. The material is the same as the measuring electrode; 4. The grounding ring is in contact with the medium; 5. Connect the two ground rings with a single core wire of not less than 4mm2 and then ground.
Knowledge about the selection of tantalum grounding ring: 1. Protection ring: F lining sensor should choose a protective grounding ring, which is fixed on the flange by screws to protect the flanging of the lining from damage. 2. Grounding ring material: HC-276, 316L, titanium, tantalum, special requirements can be specified separately when ordering. 3. Standard grounding ring: On plastic and cathodic protection pipes whose inner and outer walls are insulated to prevent electrolytic corrosion, grounding rings must be installed on both sides of the sensor. 4. Neck protection ring: If the medium is highly abrasive, a neck protection ring should be used to protect the lining.
Baoji Yusheng Metal Technology Co., Ltd. is a high-quality supplier of tantalum grounding rings in China. Our company can customize single-ear / double-ear / special-shaped tantalum grounding rings according to customer requirements. In addition, we will also give you different levels of discounts according to the number of orders you actually need.
