Nov 16, 2022 Leave a message

What Are the Characteristics of Molybdenum Targets?

Because molybdenum has the characteristics of high melting point, high electrical conductivity, low specific impedance, good corrosion resistance, and environmental protection, molybdenum targets are widely used in the electronics industry, such as electrodes for flat-panel displays, thin-film solar cells, and accessories. Line information, now let Xiaobian and you know about the characteristics of molybdenum targets in tungsten and molybdenum products.

Molybdenum Target in Stock

1. High-purity molybdenum target

Generally, the purity of the molybdenum sputtering target should be at least 99.95%. However, with the continuous improvement of the size of glass substrates in the LCD industry, and according to the size of the sputtered glass substrates and the application environment, the purity of molybdenum sputtering targets is required to be 99.99%-99.999% or even higher.

2. High-density molybdenum target

In the process of sputtering coating, when the sputtering target with low density is bombarded, due to the sudden release of gas existing in the pores of the target material, large-scale target particles or particles are formed to splash, or the film material is subjected to secondary damage after film formation. The secondary electron bombardment forms a splash of particles, the presence of which can degrade the film quality. In order to reduce the pores in the solid of the target material and improve the performance of the film, the sputtering target material is generally required to have a higher density.

3. Grain size

Generally, the molybdenum sputtering target has a polycrystalline structure, and the grain size can range from micrometers to millimeters. Experimental studies have shown that the sputtering rate of the micro-scale molybdenum grain target is faster than that of the coarse grain, and the target with a smaller difference in molybdenum grain size has a more uniform thickness distribution of the deposited film.

4. Crystallization direction

Since the atoms of the target are simply sputtered in the direction of a hexagonal strict arrangement of atoms during sputtering, in order to achieve the sputtering rate, the sputtering rate is often increased by changing the crystal structure of the target. The crystallographic direction of the target also has a great influence on the thickness uniformity of the sputtered film. Therefore, obtaining a target structure with a certain crystallographic orientation is crucial to the sputtering process of thin films.

5. Thermal conductivity

Manufacturers of tungsten and molybdenum products tell you that the molybdenum sputtering target must be connected to the chassis of oxygen-free copper (or other materials such as aluminum) before sputtering so that the thermal conductivity between the molybdenum target and the chassis can be guaranteed during the sputtering process. After binding, it is necessary to pass ultrasonic inspection to ensure that the unbonded area of the two is less than 2%, so as to meet the requirements of high-power sputtering without falling.

6. Molybdenum target performance

Purity: pure molybdenum ≥ 99.95%, high temperature molybdenum ≥ 99% (add rare earth elements)

Density: ≥10.2g/cm3

Melting point: 2610℃

Specifications: round target, plate target, rotating target

The suitable environment for the molybdenum target produced by Baoji Yusheng Metal Technology Co., Ltd. is a vacuum environment or inert gas protection environment. The pure molybdenum content in the molybdenum products we provide is high, the high-temperature resistance is 1200 degrees, and the high-temperature resistance of molybdenum alloy is 1700 degrees. The molybdenum targets produced by our company are of high quality, reasonable price, and fast delivery.


Send Inquiry

Home

Phone

E-mail

Inquiry