Sep 20, 2022 Leave a message

What are the Chemical Characteristics of High-purity Zirconium Plate?

Zirconium is a chemically very active element. It is easy to react with various gases in the atmosphere at high temperatures, and it is corrosion-resistant. It is used in petroleum, chemical, atomic energy and other industries. Oxygen, hydrogen, nitrogen, and other elements are polluted, forming hard and brittle compounds, resulting in a brittle needle-like structure, the hardness and strength of the welded joint increase, the plasticity decreases, and the corrosion resistance is also greatly reduced. Welding, heat-affected zone, completely isolated from air, welding of zirconium plate generally uses tungsten inert gas shielded welding, other welding methods include electron beam welding, plasma arc welding, resistance welding, etc., its welding performance is relatively close to titanium metal welding, The thermal expansion coefficient and elastic modulus of zirconium are small, so the welding deformation and welding residual stress are small. In the case of no pollution, the weld is not prone to crystallization cracks and cold cracks. Generally, zirconium easily reacts with the atmosphere at high temperatures and begins to absorb under 200 Oxygen, hydrogen absorption at 300 °C, and nitrogen absorption at 400 °C, the higher the temperature, the more intense the reaction intensity. Another major problem of zirconium welding is that the welding is excessively softened, the weld is easy to dislocate, and the weld at the root is easy to burn out. Therefore, welding zirconium When welding, it is necessary to properly fix the welding objects, and try to use double-sided welding. Except for titanium, niobium, silver, and vanadium, zirconium cannot be directly welded with other metals.

High Purity Zirconium Plate Supplier

Selection of welding materials for zirconium plates and welding environment requirements

The welding wire used in tungsten argon arc welding for zirconium plates and zirconium alloys is generally the same as the base metal. The appearance must be smooth and round, and defects such as burrs, wrinkles, overlaps, cracks, and voids are not allowed. Micro-inspection, segregation, glue residue, and other defects are not allowed. The table below is the recommended welding wire for general zirconium and zirconium alloy welding.


Requirements for zirconium plate construction environment

(1) Set up special prefabricated components, and the welding place should be kept clean and dry.

(2) The ambient temperature should be above 5 degrees.

(3) It is strictly forbidden to weld, cut, and grind ferrous metals in the welding place.

(4) When welding zirconium plate materials on site, windproof and rainproof measures must be taken. When the wind speed exceeds 0.5M/S and the relative humidity exceeds 80%, welding is prohibited.


The cutting and beveling of the zirconium plate can be done by mechanical methods or by thermal cutting methods such as oxygen-acetylene flame and plasma arc. However, due to the strong fire smoke generated by thermal cutting, the material around the incision is seriously polluted and must be removed by grinding. , causing waste. Therefore, when cutting the workpiece, mechanical methods should be used as far as possible, such as sawing, turning, milling, drilling, planning and other processing methods, and cooling with water cooling liquid to avoid damage to the material due to temperature rise, and the inner and outer surfaces of the slope 25MM thick oxide film It can be cleaned with a file, an electric grinder, and a grinder. The surface of the groove is clean and free of defects such as burrs, pits, and residual sand. Finally, it must be carefully cleaned with a stainless steel wire brush. The tools used for processing are special, please keep them. Cleaning, debris, and droplets from processing will spontaneously ignite when accumulated in the air, please store them in a container with water.

 

Baoji Yusheng Metal Technology Co., Ltd. can produce all kinds of zirconium plate materials. We use high-quality zirconium raw materials, and pass strict technical checks to ensure customers' peace of mind.


Send Inquiry

Home

Phone

E-mail

Inquiry