Zirconia Crucibles

Zirconia Crucibles

Zirconia crucibles with a purity of 99.9 and a density of 6.51 g/cm3 and a maximum operating temperature of 2200°C are mainly used for melting precious metals and have good resistance to thermal stability. It is mainly used for melting precious and rare metals. Zirconia crucibles are ideal for experimental high temperature refractory products with good high temperature stability. It can successfully melt precious metals such as platinum, palladium, ruthenium and caesium and their alloys.
Send Inquiry
Product Introduction

Name: Zirconia crucibles

Performance: High-temperature refractory products

Grade:(ZR60702 ZR60705 UNS standard)(Zr-1 Zr-3 Zr-5 national standard general industry standard)

Standard:ASTM B550 ASTM B550-07 GB/8769-88

Advantages: Good thermal stability resistance

Application: Melting of precious metals

Density:6.51g/cm3

Melting point:≥1800℃

Purity:≥99.4%

Impurity content: single impurity element≤0.01%

Specification:30ml 40ml 50ml 60ml 80ml 100ml 130ml 

Also can be customized according to the actual needs of users of variously shaped parts

Place of origin: Baoji, Shaanxi


Uses Dry white-hot gas lamps, porcelain trapping, white glass, refractory crucible smile manufacturing, X-ray imaging, abrasive materials, with yttrium used to manufacture infrared spectrometer in the light source lamp, thick film circuit capacitive materials, piezoelectric crystal transducer formula.


Although a wide range of refractory materials can be used as crucible materials for precision vacuum investment casting, many have disadvantages that severely limit their use. Partially stabilized zirconia (note: zirconia with a biphasic structure consisting of cubic ZrO2 and a portion of tetragonal ZrO2) has sufficient refractoriness, chemical inertness, and thermal shock resistance to be the material of choice for most such applications.


Its excellent properties have also long been recognized by many industries, including semiconductor crystals.

Zirconia crucibles have a higher melting point than zirconium, at 2700°C, making it one of the best materials in nature for refractory properties. It has poor thermal conductivity, but is highly conductive and highly resistant to corrosion, even when heated to over 1900°C. It does not interact with molten aluminum, iron, nickel, platinum, and other metals, silicates, and acidic slags. It can therefore be used to manufacture crucibles for melting precious metals, refractory tubes, heat-resistant glass, and heat-resistant enamels. The addition of Zirconia crucibles to enamels and glasses increases their resistance to acid and alkali corrosion. High-temperature furnaces lined with zirconium dioxide do not increase in volume much when heated, and temperature changes have very little effect on it. The furnace body does not crack due to thermal expansion and contraction, which can greatly extend the life of the furnace. Zirconium dioxide is used as a refractory material, and 5% calcium oxide is added as a stabilizer. Its heat resistance is 500 degrees higher than that of alumina, and its adiabatic capacity is three times higher than before it was added. By mixing white zirconium dioxide into the ceramic, it makes the ceramic whiter and brighter, more heat resistant and stronger, and by using this ceramic to manufacture high-temperature insulating vases, the insulation capacity is very strong and the expansion coefficient is very small.

Ready: We can customize all kinds of non-standard zirconia crucibles according to customer requirements!


Zirconia crucibles suppliers


Hot Tags: zirconia crucibles, suppliers, manufacturers, factory, customized, buy, price, quotation, quality, for sale, in stock, Zirconium

Send Inquiry

Home

Phone

E-mail

Inquiry